Post by Guitarist on Mar 26, 2012 16:57:18 GMT 8
1. DYE
Dylon Dye can be found at hardware store or art supply retails. Costs around RM5~6 each.
Prepare a small bucket of warm water, pinch of salt, and a paint brush. I'd suggest avoid using paint brush with BLACK hair type. Try getting something in Brown or Beige tone. The quantity of salt and amount of water required are all stated in the manual.
Soak the paint brush overnight.
Love the natural random tones. This is the reason why I prefer using lighter tone brush.
Dye more for safe keeping. Never know when mistakes happen.
For sharing, there are several more colors I experimented with. Apparently the colors did not turn out like the colour printed on the case.
2. PRE-PLANTING
Have PVA glue prepared on a plate.
Cut off the brush bit by bit, notice that oftentimes, you'll get uneven ends.
Trim the ends evenly. Be noted that straightening the ends would allow the hair to land more securely and form a firmer foundation. You'll get a better idea on the following pictures.
Dip into the PVA Glue.
Plant the chunk of grass onto a plastic or wax paper. As abovementioned, an evenly trimmed grass would allow a more steady holding grip of the grass. Then gently adjust the grass with tweezer accordingly.
Leave them overnight.
3. PLANTING
Here's the area where I gonna grow some grass.
Apply PVA Glue on desired area.
Flock a finer grass turf to create a base.
And finally, up you go.
Dylon Dye can be found at hardware store or art supply retails. Costs around RM5~6 each.
Prepare a small bucket of warm water, pinch of salt, and a paint brush. I'd suggest avoid using paint brush with BLACK hair type. Try getting something in Brown or Beige tone. The quantity of salt and amount of water required are all stated in the manual.
Soak the paint brush overnight.
Love the natural random tones. This is the reason why I prefer using lighter tone brush.
Dye more for safe keeping. Never know when mistakes happen.
For sharing, there are several more colors I experimented with. Apparently the colors did not turn out like the colour printed on the case.
2. PRE-PLANTING
Have PVA glue prepared on a plate.
Cut off the brush bit by bit, notice that oftentimes, you'll get uneven ends.
Trim the ends evenly. Be noted that straightening the ends would allow the hair to land more securely and form a firmer foundation. You'll get a better idea on the following pictures.
Dip into the PVA Glue.
Plant the chunk of grass onto a plastic or wax paper. As abovementioned, an evenly trimmed grass would allow a more steady holding grip of the grass. Then gently adjust the grass with tweezer accordingly.
Leave them overnight.
3. PLANTING
Here's the area where I gonna grow some grass.
Apply PVA Glue on desired area.
Flock a finer grass turf to create a base.
And finally, up you go.
