Post by Phoon on Mar 30, 2012 23:33:07 GMT 8
Starting to take shape on my base by using recycle styrofoam (for mountain terrain) , ready made hangar base (obviously for my dockyard structure!).....
Close-up on terrain detail by using aerosol lacquer application onto styrofoam surface. (for desire of rock effect)
2nd stage of process using tissue paper as foundation on hard terrain and sea bed......
Close on sea bed foundation works.....
Close up on between cliff edge and sea bed......
Next further step using 'Tempera Paste' paint for base coat foundation.
3 main base color : Black / White / Red
2nd step using 'Leopard Spot' technique wash with mixing dark grey colors to own preference
3rd step - ditto above but mixing dark brown for enhancement
Close up
Minor touch up on cliff edges (moss tone) following with sea bed color base = Blue + Black + Green
Wait for curing before 2nd stage of color tone......
2nd stage of fine tune effect. Wait for curing before apply acrylic gel.....
3rd stage of applying arcylic gel.....wait for curing for further steps......
Final 'touche' with a layer of 'FUTURE FLOOR'......
Ditto and a roundup for the seabed......now move back to structure.....
Add-on props - moss, waves and main gate(seasoned)
Enhanced waves more 'raging' effect using clear silicone gel
Ditto
Water effect and sea bubble on my subject.......
Ditto
Hairspray techniques...
Ditto above....
Final touche will be applying rustic stain effect........
For those 'red spot' are meant for rust effect marking.......
For completed works, you can browse via here www.pla-zone.com/index.cgi?action=display&board=g&thread=61&page=1
Thanks for dropping by!