|
|
Post by darker234 on May 24, 2012 20:48:29 GMT 8
I wanna share a Modify weapon here  ...using HG 1/144 00 QAN[T] Blade , 1/144 Full Saber and some pla plate This is my design  Before Combine look like  Will more Update Soon |
|
|
|
Post by Rayloke on May 25, 2012 1:34:24 GMT 8
ah... that's the green color part u were asking about?
|
|
|
|
Post by darker234 on May 25, 2012 10:14:29 GMT 8
yaya...i wanna turn into clear red....any idea??
|
|
|
|
Post by Rayloke on May 25, 2012 12:34:13 GMT 8
no way..... unless u modify using other no-color clear parts.... then spray clear red....
|
|
|
|
Post by darker234 on May 25, 2012 12:49:50 GMT 8
clear pla plate hard to find....
|
|
|
|
Post by Phoon on May 25, 2012 17:31:35 GMT 8
Little that i know that market have any clear pla-plate which really putting me in doubts. Suggest you to source for thin clear acrylic ranging from 2-3mm thickness if avail. As for chamfer edges, you can use sandpaper grit for the process following up with polishing compound to achieve back its transparency. But its heck a lot of patience and dedication involve!!! Just my cents worth......  |
|
|
|
Post by darker234 on May 25, 2012 18:31:02 GMT 8
hear like so hard to make it perfect ><....but i still need to try it....so what tool i need it for that process??
|
|
|
|
Post by Phoon on May 26, 2012 11:06:42 GMT 8
couples of fine grit sanding paper and polishing compound is all you need
|
|
|
|
Post by darker234 on May 26, 2012 12:26:25 GMT 8
what is polishing compound??? ICW can get it??
|
|
|
|
Post by Phoon on May 27, 2012 15:04:33 GMT 8
Literally mostly its meant for car modelling. Came with 3 types:- Course, Fine, Finishing if notmistaken. Yeah you can go toICW and lookfor it. From there, you will get your answer.  |
|
|
|
Post by darker234 on May 28, 2012 12:10:05 GMT 8
thx....
|
|
...using HG 1/144 00 QAN[T] Blade , 1/144 Full Saber and some pla plate
