|
Post by beckylaw on Feb 7, 2013 19:16:44 GMT 8
Commission build, mostly is OOB just little bit of modding on the head to fit in a LED, also built a battery casing to hold the battery. Some first encounter for this build. The LED installation and digital camouflage. Keep it simple for the LED installation, simple circuit which contain the batt holder, switch and LED. As for the camouflage, its kinda tedious to work on it, try to keep the coolness and not over do. Without further ado, here's the pic of my first build in 2013. More pic can be found here, www.flickr.com/photos/beckycustomizer/sets/72157632693553316/
|
|
|
Post by Phoon on Feb 8, 2013 0:50:07 GMT 8
You did it once again!
|
|
PAK
Newcomer
Posts: 56
|
Post by PAK on Feb 8, 2013 21:18:21 GMT 8
Never failed impressing me
|
|
|
Post by beckylaw on Feb 15, 2013 11:12:01 GMT 8
Thanks guys for the complements.
|
|
|
Post by Rayloke on Feb 19, 2013 13:14:39 GMT 8
Hi sis, first i know this is a commission job many things r decided by your client. However, am gonna comment this based on it's a private project from you. Overall, the color combination n finishing makes this kit looks really interesting, and as "big n heavy" as it should be. The digital camo or decoration makes it looks so much more visually abundance as compared to the original. Very nice job!!!
Just some picky comment though: The draw back of this kit is basically of its size vs the details. Despite the digital camo, I think adding some, maybe more decals would really help. Besides decals, some colors on the small details on the mecha would help too.
For the digital camo, if the thing cross over to one surface to another, it is still ok, visually it's not that easy to see. If it is on a very big flat surface, gotta be very careful about it being straight n uniform (eg the inner foot)
Just my 2 cents worth.
Overall, I must say the digital camo thing is really a beautiful n clever touch!!!!
|
|
|
Post by beckylaw on Feb 20, 2013 10:41:04 GMT 8
Ya, there's some part in the inner leg the masking tape misaligned, din notice it until i pull off the masking tape, perhaps should try with another kind of digital camou, no need to worry bout alignment. Thanks for the input Ray.
|
|