Post by tos on Dec 26, 2013 13:17:00 GMT 8
Hi,
Here are the pictures taken during my build. Forgot to take pictures toward the end of the weathering. Lets me know if you have any question.
I alway wanted to built this Hummel because of the design and the endless possibilities of weathering on this jet. Before I start this project, I am thinking to have slight rust on the jet with raw metal look. I think I achieved the objective but need improvement on the weathering like washes and streaking. If I can give more patience in this kit, I believe it would turn out better. I hope you guys enjoy my WIP and here is the finished kit.
pla-zone.proboards.com/thread/974/ma-1-20-hummel
Thanks.
1. Snap Fit done and tried my best to cover all seam lines.
2. Before sealing the Jet, need to paint internal flat black.
3. Superglue it and leave it to one day.
4. Prime with Oxide Red and ready for CHIPPING!
5. Sprayed with AK Interactive chipping solution.
6. Now ready for painting the nozzles. Primed it with 1200 great primer. Spray with gun metal.
7. Spray with Alclad Aluminium + Gold Titanium to create the effect. Later will spray transparent blue.
8. Sprayed with light rust on raised detail.
9. Spray with Tamiya Acrylic Olive Drab and ready to chip!
10. Chipped it with it doesn't look good as the contrast is too huge. Eye sore!
11. Applied brown filter to blend between the colours. Applied until I satisfy with the colours. I am using sponge chip too using olive drab to blend the colours nicely.
12. Further detail sponge chip on areas which I think need improvement. Sponge chipped the thruster which using Chrome Alclad. Using enamel thinner to chip off the chrome areas to reveal black chipping.
13. You can see the Gun metal + Alclad Gold titanium + Alclad Aluminium + Transparent Blue. After that washed it with streaking grime to create weathering effect.
14. Done it with all 5 nozzles. Look nice to me!
15. The engines are painted with Mr. Color Iron and puffed it nicely. Washed with streaking grime.
16. Decal time.
17. Masking to paint the orange band. Need to chip it too.
18. Painted the tires with Tire Black and sand at the side to create the effect.
19. Chipped the decal.
20. Applied weathering washed and pigment for finishing touch.
Here are the pictures taken during my build. Forgot to take pictures toward the end of the weathering. Lets me know if you have any question.
I alway wanted to built this Hummel because of the design and the endless possibilities of weathering on this jet. Before I start this project, I am thinking to have slight rust on the jet with raw metal look. I think I achieved the objective but need improvement on the weathering like washes and streaking. If I can give more patience in this kit, I believe it would turn out better. I hope you guys enjoy my WIP and here is the finished kit.
pla-zone.proboards.com/thread/974/ma-1-20-hummel
Thanks.
1. Snap Fit done and tried my best to cover all seam lines.
2. Before sealing the Jet, need to paint internal flat black.
3. Superglue it and leave it to one day.
4. Prime with Oxide Red and ready for CHIPPING!
5. Sprayed with AK Interactive chipping solution.
6. Now ready for painting the nozzles. Primed it with 1200 great primer. Spray with gun metal.
7. Spray with Alclad Aluminium + Gold Titanium to create the effect. Later will spray transparent blue.
8. Sprayed with light rust on raised detail.
9. Spray with Tamiya Acrylic Olive Drab and ready to chip!
10. Chipped it with it doesn't look good as the contrast is too huge. Eye sore!
11. Applied brown filter to blend between the colours. Applied until I satisfy with the colours. I am using sponge chip too using olive drab to blend the colours nicely.
12. Further detail sponge chip on areas which I think need improvement. Sponge chipped the thruster which using Chrome Alclad. Using enamel thinner to chip off the chrome areas to reveal black chipping.
13. You can see the Gun metal + Alclad Gold titanium + Alclad Aluminium + Transparent Blue. After that washed it with streaking grime to create weathering effect.
14. Done it with all 5 nozzles. Look nice to me!
15. The engines are painted with Mr. Color Iron and puffed it nicely. Washed with streaking grime.
16. Decal time.
17. Masking to paint the orange band. Need to chip it too.
18. Painted the tires with Tire Black and sand at the side to create the effect.
19. Chipped the decal.
20. Applied weathering washed and pigment for finishing touch.